USER MANUAL
PAGE 4
Ωmega
digitech
©2017
In attenuation mode, with the select button pressed, the display will show the actual level of at-
tenuation at the the output for instance
00
. Keep the select button pressed and use the up or
down buttons to change this value (00 - 15).
In the last mode the program ID can be changed.
The selected values are automatically saved in the memory of the M
20
1.
Once these settings made, the display on the
M201
will return to its standby state. The display
shows one or two dots. One dot to indicate that power is applied to the unit. The second dot to the
right indicating that a HDMI source is connected to the unit.
4.3 - Return to factory settings.
To return to factory settings, power down the modulator. Now, with the UP button pressed, put the
power again to the modulator. Keep the UP button pressed ands wait until the mesage
r5
appears
on the display. The modulator has returned to its factory settings.
M201
5 - Advanced settings using a PC
More, advanced settings of the M
201
can be changed using a PC.
First, please install the software TMHDIFace on your PC. You can download this software from
our
internet site
www.onetrade
.
gr
After installation of this software, connect the M201 using a USB cable (not included) to your per-
sonal computer. Then launch the program
TMHDIface
On the display of the M201 the message
()
appears, indicating that the programming is now per-
formed through your PC. The following window appears on your screen.
.
Now, further parameters can be edited in the M201.
