USER MANUAL
PAGE 3
Ωmega
digitech
©2017
M
20
1
3 - Description of the different elements
A1
Alphanumeric display
T1
SELECT
button
T2
(UP) button
T3
(DOWN) button
T1
T2
T3
A1
C1
C2
C3
C4
C1
C2
C3
C4
C5
Power supply input (5V/2A)
USB input (for programming the M
20
1 by PC)
RF input
RF output
HDMI input
C5
4 - Installation and quick menu
4.1 - Installation
Connect the audio and video source using a HDMI cable. Connect the RF input cable (if present)
and the RF output cable. If the RF input is not used, please connect a 75 ohm terminating resistor
to it. Once the modulator installed and the cables connected, please proceed connecting the power
supply to the modulator.
4.2 - Powering up and quick menu
Plug in the connector of the power supply. The display will show a
red dot
in the left uppercorner.
Once the modulator has booted correctly the display will show :
ch
With the buttons UP and DOWN, you can toggle between
ch
(channel) ,
AT
(attenuation) and
ID
(program id) .
Once selected the right option, press and hold the select button.
In channel mode, the display will show you the actual output channel. For instance
21
With the select button pressed use the up and down buttons to change the output channel.