30
LVCN414-SW Appendix
(continued)
Section Six
PUMP/VALVE ACTION
This feature allows you to select whether the pumps or valves will be
used to automatically fill or empty the tank. For 2-Pump/Valve mode,
both devices must be used in the same (automatic fill or empty) way.
You cannot set one relay for fill and the other for empty.
o
Empties Tank –
Sets the relay(s) to automatically empty a tank.
The start level will be above the Stop level for each relay.
o
Fills Tank –
Sets the relay(s) to automatically fill a tank. The
start level will be below the Stop level for each relay.
o
Not Applicable –
Appears when this function is not available
based on previous selections.
Empties Tank
Fills Tank
(Auto Empty)
(Auto Fill)
Note:
Right click on any item to open the help menu.
Note:
To reset the configuration table, press the Clear Screen button.
