Omega LVCN6000 series, User Manual

Page: 9 / 16

09
www.omega.com e-mail: info@omega.com
Installation
For probes with cable extensions, installation
should be from the top of the tank.
It is also
recommended that for these probes the process
shouldn't have any agitation as this can cause
fluctuating readings or damage to the probe
(Fig. 5).
The LVCN with rigid rod is recommended for
applications that have turbulence or vortices
throughout use (Fig.6).
Ensure that the conduit is facing downward to
avoid water from entering the housing (Fig. 7).
Verify that the probe has been wired as per the
instructions on page 7.
The probe must be installed utilizing the type of
connection provided.
The Capacitance Probes Series will not work
properly in viscous, coating mediums with high
salt content (high di-electric), especially when
mounting from the side of the vessel. Sitron does
not recommend using this product in this type of
application unless otherwise specified.
Caution:
Before installing the probe, ensure that the
available power supply is correct.
Verify that the operating pressure and
temperature of the process corresponds to the
operating parameters of the probe.
Fig. 5
Fig. 7
Fig. 6