The system may be "Disarmed" by any of 3 methods:
1)
Remote Control Disarming: Press & Release the “Unlock” button
2) SILENT Remote Control Disarming:
Press & Release the
“3rd”
button Twice within 3 sec
Upon Disarm:
• The siren will chirp twice.
(4 chirps if alarm has activated & reset)
• The parking lights will flash twice.
(4 times if alarm has activated)
• The doors will unlock.
(If an optional interface is connected)
• The starter interrupt will disengage.
• The LED Status Indicator begins flashing rapidly for Automatic
Rearming, until alarm Rearms or a vehicle door is opened.
2-STAGE DISARM:
If Disarming the alarm while it is triggered (siren sounding), the
first press of any remote control button will only silence the siren/horn. A second
press of the “Unlock” button will Disarm the alarm.
IMMOBILIZER MODE:
If this mode is programmed “On”, the starter interrupt will
remain engaged after the alarm is Disarmed, until the ignition is turned “On” and you
Press & Release the Valet button.
(Refer to programmable feature
#
5)
To Start Vehicle: .
1. Disarm the alarm, then Turn “On” the vehicle’s ignition
2. Press & Release the Valet Button.
Step 1:
With the system in the armed condition, enter the vehicle via the driver's
door
(be aware that the alarm will trigger when the door is opened)
.
Step 2:
Using your key, turn the vehicle’s ignition to the "On" position.
Step 3:
Within 10 seconds, Press & Release the Valet/ Override Switch.
Disarming the Alarm
Emergency Override
THEN WITHIN
10 SECONDS
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE SIREN WILL
CHIRP TWICE
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
2 X
2 X
