background image

The Anti-Carjacking sequence may be activated by any of 3 methods:

1) Using the remote control, by holding down the Small “4th”

 

 Button for

    3 seconds while the ignition is “On”.  

(programmable feature 

#

 10)

2) When a door is 

Opened

 while the ignition is “On” 

(programmable feature 

#

 10)

3) Every time the ignition is turned “On”. 

(Programmable feature 

#

 9)

1) Anti-Carjacking activated using the transmitter: 

  (programmable feature 

#

10)

The Anti Car-Jacking operation may be activated by pressing and holding the
remote control’s Small “4th”

 

 button for 3 seconds while  the ignition is “On”.

2) Anti-Carjacking activated by an Open door:  

(programmable feature 

#

10)

If programmable feature 

#

10 is “On”, the system will initiate the Anti-Carjacking

sequence every time a vehicle door is opened while the ignition is “On”.

3) Anti-Carjacking activated by the ignition:    

(programmable feature 

#

9)

If programmable feature 

#

9 is “On”, the system will initiate the Anti-Carjacking

sequence every time the vehicle’s ignition is turned “On”.

IMMOBILIZER MODE:

  If the “Immobilizer mode” is programmed “On”, the

ignition activated anti-carjacking sequence will be cancelled and the “Immobilizer
mode” disarmed by:    

first turning “On” the vehicle’s ignition, then Pressing &

Releasing the valet button.   

(Refer to programmable feature 

#

 5)

Once the Anti-Carjacking sequence has begun, the user has 59 seconds to
press the Valet/Override Switch in order to cancel the sequence.

ORDER OF ANTI-CARJACKING SEQUENCE:

- For first 20 seconds after the sequence has begun there are no signs.
- From 21-30 seconds, the LED will blink slowly.
- From 31-45 seconds, the LED  will blink fast and the siren/horn will chirp
  once every 2 seconds.
- From 46-60 seconds, the LED  will blink fast and the siren/horn will chirp
  once per second.
- If not cancelled yet, at 61 seconds the alarm will trigger.

In the triggered condition:

- The siren/horn will sound & The parking lights will flash.
- The starter interrupt will engage.

NOTE:

 Once the Anti-Carjack mode is triggered, the remote control will NOT

stop the operation, nor will the system reset automatically.  

Once it is trig-

gered, the Anti-Carjacking operation can only be deactivated by:
1)

 Turning the vehicle’s ignition “Off”.

2)

 Turning the vehicle’s ignition back “On”.

3)

 Within 10 seconds, Press & Release the Valet button.

Programmable  Anti-Carjacking  Protection

Summary of Contents for k9 mundial ssx















Reviews: