E
= LIGHT
•
If your appliance does not have the
INTENSIVE
speed function, press key
A for two seconds and it will be activated for 15 minutes after which it will
return to the previously set speed. When the function is active the LED
flashes.
By pressing any key for the exclusion of the hood light the hood will return
immediately to its normal functioning.
The “automatic stop timer” delays stopping of the hood, which will
continue functioning for 15 minutes at the operating speed set at the
time this function is activated.
Troubleshooting
Problem
Possible reason
Solution
Check the plug is connected
Hood doesn’t work
No electric supply
Check the main switch is turned on
Aluminum grease
filters clogged
Clean the filters and replace when
dry
Poor airflow
Charcoal filters
clogged
Replace the charcoal filters
Motor running but no
air flow
Butterfly valve jammed Contact technician
High temperature
safety device activated
The kitchen is not sufficiently
ventilated
Motor cuts after a
few minutes
The hood is installed
too near the cooking
stove
The hood must be least 65cm from
stove
Strong cooking smell Charcoal filters not
installed
In re-circulating mode, charcoal
filters must be installed
Oil cup missing or not
installed
Remove aluminum filter and
replace oil cup
Oil dripping onto
stove
Aluminum grease filter
saturated
Wash the aluminum grease filters
Whirring sound
Something in contact
with fan blade
Contact with technician
THE MANUFACTURORY DECLINES ALL RESPONSIBILITY FOR
EVENTUAL DAMAGES CAUSED BY BREACHING THE ABOVE
Summary of Contents for K224
