background image

• FIXING TO THE WALL 
 

Drill the holes 

respecting the distances indicated (Fig.2). 

Fix the appliance to the wall and align it in horizontal position to the wall 
units. When the appliance has been adjusted, definitely fix the hood using 
the screws 

A

For the various installations use screws and screw anchors suited to the type 
of wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and screw 
anchors are provided with the product check that they are suitable for the 
type of wall on which the hood is to be fixed. 

 
• FIXING THE DECORATIVE TELESCOPIC FLUE 
 

Arrange the electrical power supply within the dimensions of the decorative 
flue. If your appliance is to be installed in the ducting version or in the 
version with external motor, prepare the air exhaust opening. Adjust the 
width of the support bracket of the upper flue (Fig.3). Then fix it to the 
ceiling using the screws 

(Fig.2) in such a way that it is in line with your 

hood and respecting the distance from the ceiling indicated in Fig.2. Connect 
the flange 

to the air exhaust hole using a connection pipe (Fig.4). 

 
To transform the hood from a ducting version into a filtering version, ask 
your dealer for the charcoal filters and follow the installation instructions. 

 
• FILTERING VERSION 
 

Install the hood and the two flues as described in the paragraph for 
installation of the hood in ducting version. To assemble the filtering flue 
refer to the instructions contained in the kit. If the kit is not provided, order it 
from your dealer as accessory. The charcoal filters must be fitted in the 
ducting unit located inside the hood. 
 
 

USE AND MAINTENANCE 
 
• 

It is recommended to operate the appliance prior to cooking. 

It is recommended to leave the appliance in operation for 
15 minutes after cooking is terminated in order to completely eliminate 
cooking vapors and odours. 
The proper function of the cooker hood is conditioned by the regularity of 

Summary of Contents for K224












Reviews: