the maintenance operations, in particular, the active carbon filter.
•
The anti-grease filters capture the grease particles suspended in the air, and
are therefore subject to clogging according to the frequency of the use of the
appliance.
In order to prevent fire hazard, it is recommendable to clean the filter at a
maximum of 2 months by carrying out the following instructions:
- Remove the filters from the cooker hood and wash them in a solution of
water and neutral liquid detergent, leaving to soak.
- Rinse thoroughly with warm water and leave to dry.
- The filters may also be washed in the dishwasher.
The aluminum panels may alter in color after several washes. This is not
cause for customer complaint or replacement of panels.
•
The active carbon filters purify the air that is replaced in the environment.
The filters are neither washable nor reuseable and must be replaced at
maximum every four months. The saturation of the active carbon filter
depends on the frequency of use of the appliance, by the type of cooking and
the regularity of cleaning the anti-grease filters. (Fig 6) To remove the
charcoal filters place on hand on one filter at a time and turn it toward the
front part. The charcoal filter can now be removed. Always ensure to replace
both filters at the same time.
•
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non-abrasive liquid detergent.
• The illumination installation is designed for use during cooking and not for
prolonged general illumination of the environment. Prolonged use of the
illumination installation notably reduces the duration of the bulb.
DO NOT USE THE LIGHT AS A “NIGHT LIGHT”.
Use a one-edged screwdriver or any other appropriate tool to lift and remove
the overhead light fixture. Replace the damaged lamp. Use only halogen
lamps as the original specification, avoiding contact with hands. Return the
light fixture to its position (snap fastening). (Fig. 7)
• COMMANDS:
(Fig.8)
•COMMANDS:
(Fig.9)
A
= TIMER – 15 MINUTES
A= OFF
B= SPEED I
C
= SPEED II
B
= SPEED I / OFF
C
= SPEED II / OFF
D
= SPEED III / OFF
D
= SPEED III
E =LIGHT
Summary of Contents for K224
