![background image](http://html1.mh-extra.com/html/omega/i-server-microserver-i-thx-m/i-server-microserver-i-thx-m_user-manual_4177079032.webp)
28
4.3.5 Configuration (continued)
I) Start Recording - Recording Settings
Figure 4.12 Configuration - Recording Settings
Type:
The selections are: “
No Recording”,
“
Limited
”, and “
Full Flash
”.
No Recording:
Not used.
Limited:
You must define the
Start Date
and
Time
, and
End Date
and
Time
in which
you need the recording to be done.
Full Flash:
You only need to define the
Start Date
and
Time
. The iServer will record
data until the Flash is full, then the iServer will stop recording.
Interval:
The recording interval at which the temperature or humidity is being stored
into the Flash Card. The selections are “
10 seconds
“ and “
1 minute
“.
To avoid any miscommunications when downloading the stored data using the
iFlash program or from the “Chart” page, it is strongly recommended to let the
recording run for a minimum of 3 minutes if the time interval is 10 seconds (from
the “Configuration” page), and 15 minutes if the time interval is 1 minute.
Clock Date and Time:
Real Time Clock, carried over from Configuration Page, you
may update it here as needed.
Start Date, Time:
Starting date and time for recording. Entry is required for
Limited
and
Full Flash
types of Recording.
End Date, Time:
Ending date and time for recording. Entry is required for
Limited
type of Recording only.
The
Date
and
Time
formats are
mm/dd/yyyy
and
hh:mm:ss
. Time is military time /
24 hour based. The exact formats are required otherwise an
Entries Error
message will appear in
Section C
.
J) Read Settings:
Click this button, followed by clicking the “Update” button, to retrieve
the latest Recording Settings.
Hard Reset:
Clicking on this button will reset the Ethernet Port, Flash Card Memory,
LCD, and Recording sections to a fresh start. It is suggested to click “Hard Reset” if
you experience problems with the “Start Recording” button.
If the unit is recording, the “Hard Reset” button will not function.