4.3.2 Adjustable Chart
• Click on
, the following page (
Figure 4.8
) should appear. The Java™ Applet
graph displays Temperature and Humidity values, which can be charted across the full
span (-40 to 124ºC, and 0 to 100% RH) or within any narrow range (such as 20 to 30ºC).
The time-base can display one minute, one hour, one day, one week, one month or one
year.
If a blank screen appears without any “java application running” or image of a
“Java logo”, please verify you have the latest Java Runtime Environment
installed and configured according to the instructions (refer to
Section 4.3.1.1
).
If you do not have Java Runtime Environment, you may download it from our
website or contact the Customer Service Department nearest you.
Figure 4.8 Adjustable Chart
To avoid any miscommunications when downloading the stored data from the
“Chart” page, it is strongly recommended to let the recording run for a minimum
of 3 minutes if the time interval is 10 seconds (from “Configuration” page), and
15 minutes if the time interval is 1 minute.
Flash Archive
Main Menu
http://192.168.1.200
Title
(1 Hour/Div)
1 Day
1 Day
1 Week
1 Month
1 Year
1 Minute
1 Hour
02/20/2004 09:42:10
32
9.0
F/Div
122
Temperature
73.9
0
100%
%
Humidity
Archives_Done
044.2
F
02/21/2004 09:42:10
Humidity Ramp
from 0 to 100%
User selectable time base
1 minute, 1 hour, 1 day,
1 week, 1 month, or 1 year
User selectable
temperature range
User selectable
temperature range
Number of degrees
per division
based on
temperature range
Actual Temperature
User selectable
temperature units: F or C
Actual Humidity
Alarm SP1(above)=044.5 F Alarm SP2(below)=033.5%RH
Title
Archives_Inactive:
1minute or 1hour
Archives_Enable:
1Day, 1Week, 1Month, or 1Year
Archives_Done:
charting starts for the “time” selected
in the lower pull down menu
Start Time
End Time
Setpoint
Boundary
Chart
20