![background image](http://html1.mh-extra.com/html/omega/i-server-microserver-i-thx-m/i-server-microserver-i-thx-m_user-manual_4177079026.webp)
4.3.4 Access Control
This section describes the "Access Control" page of the iServers’s Web interface. This
page allows the users to set up the network and security parameters of the iServer.
At the initial entrance to the “Access Control” page you will be prompted for the LOGIN
Password (see
Figure 4.6
) prior to an ADMINISTRATOR Password.
Figure 4.10 Access Control
Login Password:
This allows users to access and modify all of the iServer Home Page
menu items, except “Access Control”, which requires an Administrator password. The
default Login password is
12345678
. This password can be up to 16 alpha-numeric
case-sensitive characters. If there is no Login Password assigned (blank box) the
iServer will not require a password to access and modify iServer Home page menu
items.
Admin (administrator) Password:
This allows users to access and modify the "Access
Control" page. The default password is
00000000
. This password can be up to 16 alpha-
numeric case-sensitive characters. If there is no Administrator Password assigned (blank
box) the iServer will not require password to access and modify "Access Control" page.
Secured Reading & Chart:
If checked, the LOGIN password is required to open “Read
Sensor” and “Chart” Java applets.
Host Name:
Refer to
Section 3.4
, DNS.
MAC Address:
This is also called Hardware address or Ethernet address, which is
assigned to the iServer at production. The MAC (Media Access Control) address is the
iServer’s unique hardware number and is not changeable.
IP Address:
The IP (Internet Protocol) address is a 32-bit number that identifies each
sender or receiver of information that is sent in packets across the Ethernet or the
Internet. The iServer’s default IP address is
192.168.1.200
. The iServer’s IP address
should be changed to fit user’s networking environment. Consult with your IT department
for obtaining an IP address.
22
The DHCP can be
enabled by setting
the dip switch #3 to
ON
position.
Changes made in the
iServer’s Access
Control page can be
saved permanently
by pressing the Save
button.
If you change a field and
press Save, this message
will appear
Power is Recycling. Reconnect to the iServer.