![background image](http://html2.mh-extra.com/html/omega/hhm9007r/hhm9007r_user-manual_4023396007.webp)
5
1. V Hz%ns
, Voltage, Ohms, Frequency, Duty
cycle, Conductance, Diode Input Terminal
This is the positive input terminal for Voltage, Ohms,
Frequency, Duty cycle, Conductance, Diode
measurements. Connection is made to it using the red
test lead.
2. COM Common Terminal
This is the negative (ground) input terminal for all
measurement modes. Connection is made to it using
the black test lead.
3. µA Current, Input Terminal
This is the positive input terminal for µA Current
measurements. Connection is made to it using the red
test lead. Input warning detects wrong.
4. mA/20A Current, Input Terminal
This is the positive input terminal for mA/20A Current
measurement. Connection is made to it using the red
test lead.
5. Temperature Input Jacks
Remove leads and slide the temp switch to the right to
close lead jacks.
6. Function/Range selector rotary switch
This rotary switch selects the function, and selects the
desired range.
7. 6000 or RS232
(1) Press the 6000 button shift 6000 counts
60000
counts.
(2) Press the RS232 button to show "RS232" annunciator
on LCD and to start sending data to computer being
connected.
8. SHIFT Button
(1) Shift V
V
+
, mV
mV
+
ranges.
(2) Shift
ns, C
°F, Hz
% ranges.
(3) Shift µA
+
ranges.
(4) Shift 20A
20A
20A
+
ranges.
9.
Backlight Button
Press button to activate the backlight for
approximately 3.0 minutes.
10. MAX/MIN Button
The "MAX" displays the maximum value of
measurements. The "MIN" displays the minimum value
of measurements. Press MAX/MIN button for more than
2 seconds to exit.