5
OPERATION
Before taking any measurements, read the Safety Information Section.
Always examine the instrument for damage, contamination (excessive dirt,
grease, etc.) and defects. Examine the test leads for cracked or frayed
insulation. If any abnormal conditions exist do not attempt to make any
measurements.
H
Button:
Press "
H
" button to toggle in and out of DATA Hold mode, In the DATA Hold
mode, the "
H
" annunciator is displayed. (The DATA Hold mode may be exited
when changing function.)
MAX HOLD Button:
Press "MAX" button to toggle in and out of MAX Hold mode (holding the highest
absolute reading). In the MAX Hold mode, the "
MAX
" annunciator is
displayed.
Current and Hz ranges without MAX HOLD function.
PEAK HOLD Button: (only current ranges 40-60Hz)
Press "PEAK" button to toggle in and out of PEAK Hold mode. In the PEAK
Hold mode, the "
P
" annunciator is displayed. {Accuracy: ±[10%(readind -
residual 10dgts], effect reading: 80~2000}