5
NOTE:
Only ±9.9C, ±9.9F, ±9.9% are available to be adjusted. Long press
HOLD
or
BKLT
button may quick
to increase or decrease values.
DATALOGGER PC SOFTWARE SCREEN
LOGGER INTRODUCTION:
DATALOGGER FEATURES:
ü
The meter features stand alone (off-line) datalogger function, may store up to 32,004 points data in
meter, then download to PC for further analysis.
ü
There are 5 starts to record modes: (Unique) a.Immediately (Once
OK
button is pressed, meter starts to
record). b.Real-time (Meter may connect with PC for on line datalogging to see current air quality real
time). c. Key start (Long press
BKLT
button to start recording). d.Rollover (Data stored the latest 32,004
points data ). e.Schedule (Set time and date to start).
ü
While doing datalogging function, if meter is off (Out of power or fan is stopped), the stored data is still
exist.
ü
While doing datalogging, the “Recording bar” on meter LCD is flashing, see below: (If stored data is not
cleared from meter, the recording bar shows at the left corner in screen.)
Current date/time
Logger status
O
2
(%)
Download button
Exit
Logger status
Temp, RH%
Stored date/time
Parameter
Value and line color
Warning message
6
ü
There are up to 32,004 points memory capacity, you may select from 1,000 points up to 32,004 points
from pc software, the total 10 recording status bars are divided by total memory points, you may see the
recording status from bars on LCD.
ü
Great feature: If you select Rollover or Key start mode to record data, you don’t have to reset up each
parameter or setting from PC after downloading, i.e. After download stored data to PC, meter may long
press
BKLT
button to repeat recording immediately.
KEYSTART (Logging purposes):
Long press
BKLT
button to activate datalogging (Make sure you set KEY START as record mode in
software).
SOFTWARE INTRODUCTION:
INTRODUCTION DATALOGGER SOFTWARE:
USB driver installation
A.
Install logger driver before install software on Window system
The
PL2303_Prolific_DriverInstaller_v110.exe
driver is for Windows operation system, follow the
installation steps hereunder:
a) Step 1. Put the CD into CD driver, click “PL2303_Prolific_DriverInstaller_v110.exe’’ for driver
installation.
b) The set up status.
c) Click
“NEXT”
to continue.
d) After complete the installation, press
“Finished”.
B.
Install the logger software for Windows XP or above (For 1
st
time installation the software), reinstall the
software, please remove the old version first.
Follow below steps to install software:
a) After install USB driver, find “
Setup.exe”
to start installation.
b) Select the destination folder you want to save by click
“Browse”
button.
c) Once you finish the selection, press
“Next”.
d) Select
“I accept the License Agreement(s)”
, press
NEXT
button.
e) Click
“Next”
button.
f) Press
Finish
button to complete the installation.
Restart the Windows XP system.
C.
Run the software from Windows XP or above
a) Plug the USB cable into USB port, since you have already installed the USB driver, computer will
automatically detect logger.
b) Find
“Datalogger”
in START
à
PROGRAMS
c)
Select logger software folder
