9
the earliest memory.
NOTE:
Under Key start and Roll-over mode, after downloaded previous data, long press BKLT meter starts
recording with same setting.
LOGGER FUNCTION
DOWLOAD DATA:
Press DOWNLOAD button, data download in few seconds, Graph shows automatically, message area
shows the downloading points.
NOTE:
Please do not press
DOWNLOAD
button if you won’t stop record. You can press
LOGGER STATUS
button to see record points.
RETRIEVE FILE:
Press RETRIEVE FILE button to select file and show the graph on screen.
SAVE FILE:
Press SAVE button to save data as
csv.
file format.
VIEW DATA TABLE:
Press the button to get data table with detail (See right photo).
PRINT GRAPH:
Press PRINT button and print graph. Follow the print setting below to print full screen graph.
Press OK to print
PDF file.
(Pic 4).
Press table data, the screen shows the record range, enter the start number to the end number (For example:
1~500 or 200~1,000…or leave it blank for printing all data).
Save each pdf file with different name (Pic 5).
CLEAR DATA:
The data is stored in the memory till next setting start; meter will clean previous data automatically. So if you
start next data logging, there is no way you can find the data you haven't stored.
ZOOM IN/OUT & MOVE
NOTE:
If the graph size is over zoon in / out, click the color selection area below the graphic, screen may go back to
default size.
Pic 4
Pic 5
10
LINE COLOR SELECTION
1. Choose the color beside the readings (Ex. O
2
, RH humidity), color box shows below the readings.
2. Move mouse to select color
3. Click to save, then chose color appears on line and bar.
ERROR MESSAGE:
Q1:
Erratic readings?
A1:
Replace with new batteries (AAA x 6 pcs) or AC/DC adaptor and check again. Or sensor is damaged
(Normally LED on probe turns red)
Q2:
Readings are freeze?
A2:
Make sure you are using
HOLD
function, otherwise, make sure the cable is well connected with
probe.(In this condition, if you turn off the meter and turn on again, the readings are still there,
recommend to remove batteries and reinstall batteries again)
Q3
: E-02, E-1 shows on screen?
A3:
Sensor probe is not plugged onto meter, the O
2
will show E-02, and the layer of Temp. & RH% will show
E-1 icon. Please check if probe have been connected to meter when display show error codes.
ERROR CODE:
Er1: Sensor damage or failed.
Er2: Measurement out of range.
WARRANTY
This instrument is warranted for two years from the date of purchase (One year limited warranty applies to
cables). A Return Authorization letter must be issued before returning for any reason. This warranty does not
apply to defects resulting from action of the user such as misuse, abuse, alteration neglect, improper wiring,
improper maintenance or repair, or unauthorized modification, damage resulting from leaking batteries,
operation outside of specification.
During the warranty period the manufacturer reserved the right to decide either to repair or replace the
product. The meters are to be returned along with good packing to prevent any damage in shipment and
insured against possible damage or loss.
The two years’ warranty doesn’t apply to:
l
Accessories and batteries (not covered by warranty).
l
Claims are not acceptable for improper use (including adaptation to particular applications not foreseen
in the instructions manual) or improper combination with incompatible accessories or equipment or by
previous attempts for repair carried out by none skilled or unauthorized personnel.
l
Sensor damaged by user improper use (Watering, Burning, Condensation....)
