Page 29
How to Program Transmitters to the System
Whenever a transmitter, new or existing, is programmed to the system, all exist-
ing codes are erased for security. So all of the transmitters which are to operate
the system, which can be up to four, must be programmed at the same time.
To program more features, simply repeat Steps 3 and 4. If seven seconds expire
without any programming activity the system will automatically exit Features Pro-
gramming Mode. Turning on the ignition switch will also exit the system from
Features Programming Mode; in either case the system signals the exit with two
siren bursts.
Table of Contents
Page 4
The Freedom-500 Owner’s Guide
“Quick Reference” of the Transmitter Functions ........................................................................... 3
Introduction .................................................................................................................................... 5
Arming the System ..................................................................................................................... 6-8
System Armed & Activated ........................................................................................................ 8-9
Disarming the System ............................................................................................................. 9-10
Silent Arming & Disarming .......................................................................................................... 10
The Auxiliary Channels .......................................................................................................... 11-12
Multiple Vehicle Operation .......................................................................................................... 13
Remote Panic Operation ........................................................................................................ 13-15
Valet Mode & Emergency Override ....................................................................................... 15-17
The LED Status Indicator ....................................................................................................... 18-19
Auxiliary Sensor & Prewarning .................................................................................................... 20
Programmable Anti-Carjacking Protection ............................................................................. 21-22
Programmable Features ......................................................................................................... 22-27
How to Program Features ...................................................................................................... 28-29
How to Program Transmitters to the System ......................................................................... 29-30
Replacement and Optional Transmitters ......................................................................... 2 & 30-31
Limited Lifetime Warranty ............................................................................................. Back Cover
Step 1: Turn "On" the vehicle's ignition.
Step 2: Within 10 seconds press the Valet/Override Switch 5 times. The system
responds with 1 siren burst to confirm Transmitter Programming Mode.
Step 3: Within 10 seconds, press either the Trunk button or Button #4 on each
transmitter to be programmed. The response to each is 1 and 1, 1 and 2,
etc., siren burst then chirp(s).
If 17 seconds expire without any programming activity the system will automati-
cally exit Transmitter Programming Mode. Turning off the ignition switch will also
exit the system from Transmitter Programming Mode; in either case the system
signals the exit with 1 long siren chirp.
