Page 11
The Auxiliary Channels
Optional 2nd Channel Output (Trunk Release): If your vehicle is equipped with
electric trunk release, your installing dealer can configure your system to accomplish
trunk release from your transmitter. Use of the 2nd channel output is recommended
to operate this option; simply press and hold the Transmitter Trunk Button for 3
seconds. Your vehicle will respond by releasing the trunk lid or rear hatch, chirping
the siren twice, disarming the system, unlocking the doors and turning on your
parking and interior lights for 30 seconds. The trunk release will not operate with
the ignition switch "on" unless the vehicle's door is open. If desired, the security
system can be programmed to remain armed when this feature is used.
OPERATE OPTIONAL
TRUNK RELEASE
To Activate the 2nd Channel:
Press & Hold the Transmitter
Trunk Button for 3 Seconds
Hold 3
seconds
Page 22
Once the Anti-Carjacking process has begun, the user has 63 seconds to press
the Valet/Override Switch in order to cancel the process. If not cancelled, at 55
seconds the siren will begin to chirp for 8 seconds to alert the user that the system
is about to enter into an activated condition. If the Anti Car-Jacking process is not
cancelled before the 63 second countdown expires, the system will fully activate.
In the activated condition the siren/horn will sound, the parking lights will flash,
and at 95 seconds the starter interrupt will engage. Once the system is activated
in the Anti-Carjack mode, the transmitters will NOT stop the operation, nor will the
system reset automatically. Once it is fully activated, the Anti-Carjacking
operation can only be deactivated by:
First Step: Turning the vehicle’s ignition “Off”.
Second Step: Turning the vehicle’s ignition back “On”.
Third Step: Within 5 seconds Pressing the Valet/Override Switch.
Programmable Features
The Freedom-500 vehicle security system has 20 programmable features which
allow the system to be customized to suite many individual needs. The following
pages provide a brief explanation for each feature, and notes its factory default
setting. If the feature is not an “on or off” type feature, the transmitter buttons’
