background image

Page  16

Valet Mode prevents any active arming, from the transmitter, or passive arming, as
in Last Door Arming.  Valet Mode is designed for situations in which it is not
convenient for the alarm portion of the system to be operational; for example during
extended stopovers for vehicle servicing, loaning others your vehicle, mainte-
nance, valet parking, washing, etc.  The convenience features such as keyless
entry, the auxiliary channel, and ignition-activated doorlocks can still be operated.

To Enter Valet Mode:

Press & Hold the Valet

(System MUST be Disarmed)

Switch for 3 Seconds

  - The LED Status Indicator will light solid Red to confirm Valet Mode.  Now the

system cannot become armed.

The vehicle's ignition may be "On" or "Off" when entering Valet Mode.

To Exit Valet Mode:

Simply Press & Release the
Valet Switch.

  - The LED Status Indicator will turn off to confirm that the system has exited

Valet Mode and returned to a “standby” mode.  Normal arming operations may
be resumed.

Again, the vehicle's ignition may be "On" or "Off" when exiting Valet Mode.

To Disarm the Security System Without The Transmitter:

Valet Mode can only be achieved with a disarmed system.  If the system is armed,
and in the event that the transmitter is lost, damaged, or its batteries have become
exhausted, the Valet

 

/Override Switch 

& your vehicle’s ignition key may be used to

disarm the system by performing an Emergency Override:

Step 1:

With the system in the armed condition, enter the vehicle via the driver's
door 

(be aware that the alarm will activate when the door is opened)

.

Step 2:

Using your key, turn the vehicle’s ignition to the "On" position.

Step 3:

Within 5 seconds, Press the Valet/Override Switch.
-The activated system will instantly disarm.

Page  17

THEN WITHIN

5 SECONDS

When the Valet/Override Switch is pressed, and the system disarms, releasing the
switch will place the system in standby mode.  Holding the switch for 3 seconds
further after the activated system disarms will place the system into Valet Mode,
preventing further arming.  Once overridden, the disarmed system may still be
placed into Valet Mode as described on the previous pages.

Summary of Contents for Freedom 500

















Reviews: