Page - 21
To exit Feature Programming Mode, allow 10 seconds to expire without programming
activity, or turn on the ignition switch. A long siren chirp indicates the system exiting Feature
Programming Mode.
The Programmable Features, and their factory-set default setting, are:
Feature #1:
Current Sensing: Default ON.
Feature #2:
3 Minute or 3 Second Current Sensing Delay: Default 3 Minute.
Feature #3:
Last Door Arming: Default ON.
Feature #4:
Doors Lock With Last Door Arming: Default OFF.
Feature #5:
Automatic Rearming: Default ON.
Feature #6:
Doors Lock with Automatic Rearming: Default OFF.
Feature #7:
Steady Siren or Pulsed Horn Output: Default Steady Siren.
Feature #8:
Doors Lock and Unlock With Ignition On and Off: Default ON.
Feature #9:
30 or 60 Second Activation Duration: Default 30 Seconds.
Feature #10:
Double Unlock Pulse: Default OFF.
Feature #11:
Open Door Arming Alert: Default OFF.
Feature #12:
Trunk Release Disarms System: Default ON.
Feature #13:
Transmitter Activated Anti-Carjacking Protection: Default OFF.
Feature #14:
Door Activated Anti-Carjacking Protection: Default OFF.
Feature #15:
Ignition Activated Anti-Carjacking Protection: Default OFF.
Feature #16:
Confirmation Chirps: Default ON.
Programming Transmitters
Up to 4 different transmitters may be programmed to operate your security system. When
a new transmitter is programmed into the system, all previous transmitters will be deleted. If
a third or fourth transmitter is desired, all of the transmitters must be programmed at the same
time into system. To program transmitters to operate your system, follow this procedure:
Step #1:
Turn "on" the ignition; within 10 seconds press the Valet Switch 5 times. The siren
will sound a long siren chip indicating Transmitter Programming Mode.
Step #2:
To program the first transmitter, within 10 seconds press the large upper
transmitter button until the siren sounds one short chirp. Repeat this step for each
transmitter which is to operate the system.
The system will exit Transmitter Programming Mode if 10 seconds pass without receiving
a new transmission, or immediately upon turning the ignition switch “off” or upon the entry
of a fourth transmitter. Exit from Transmitter Programming Mode is indicated by a long siren
chirp.
In the above Step #2, pressing the transmitter’s large upper button assigns that button
to arm, disarm and panic the system. The other two button’s functions are automatically
assigned per the operations as described in this manual. However, other button or buttons
Page - 22
may be pressed at Step #2, changing the transmitter button operations. This allows one
transmitter to operate Freedom 200+2 systems in multiple vehicles.
Multiple Vehicle Operation: As mentioned, the security system can be programmed to
arm and disarm from other button or button combinations. These alternatives for arm/disarm/
panic are the small center button, the combination of pressing both large upper and small
center buttons at the same time. Thus, up to three different systems may be operated from
one transmitter. Alternative button operation assignment is easily done in the Transmitter
Programming Mode- at Step #2 on the previous page, instead of pressing the large upper
button, either press the small center button or the large upper and small center button
combination.
Page - 23
Small Center Button
Programmed
Large Upper & Small Center
Buttons
Programmed
Arm, Disarm
& "Panic"
Trunk Release
3rd Channel
Arm, Disarm
& "Panic"
Trunk Release
3rd Channel
L I M I T E D L I F E T I M E W A R R A N T Y
This device complies with FCC Rules part 15. Operation is subject to the following two conditions,
(1) This device may not cause harmful interference and, (2) This device must accept any interference
that may be received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the
Company), are warranted to be free from defects in materials and workmanship under normal use. If
a product sold by the Company proves to be defective, the Company will repair or replace it free of
charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge
for Omega Research and Development, Inc.'s labor and return shipping, to the original owner during
the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development,
Inc., P.O. Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase.
This warranty is nontransferable and does not apply to any product damaged by accident, physical or
electrical misuse or abuse, improper installation, alteration, any use contrary to its intended function,
unauthorized service, fire, flood, lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The
Company shall not be responsible for removal and/or reinstallation charges, damage to or theft of the
vehicle or its contents, or any incidental or consequential damages caused by any failure or alleged failure
of the product to function properly. Under No Circumstances Should This Warranty, Or The Product
Covered By It, Be Construed As A Guarantee Or Insurance Policy Against Loss. The Company neither
assumes nor authorizes any person or organization to make any Warranties or assume any liability in
connection with the sale, installation, or use of this product.
6/00 MO_FREEDOM-200+2 REV1
