the small left transmitter button within 3 seconds after pressing the large transmitter
button when arming the system. You will hear a second siren chirp, confirming the
security system has armed without the sensor circuit protecting the vehicle. The next
time you arm the security system, the system will reset to its normal condition, and the
optional sensor will again be part of your protection.
You can also pre-select your security system to automatically arm and lock the
doors. This information is described in the following section.
Page - 8
Passive System Arming By "Last Door Arming"
Passive System Arming By "Last Door Arming"
Passive System Arming By "Last Door Arming"
Passive System Arming By "Last Door Arming"
Passive System Arming By "Last Door Arming"
Your security system can be programmed to arm automatically when the vehicle's
last door is closed. The moment the last door closes, the siren will chirp once, the
parking lights and dome lights will flash once and the LED Status Indicator will begin
to flash rapidly. Thirty seconds later the siren will chirp again, the doors will lock (If
the Passive Lock feature has been chosen) and the LED Status Indicator will slow to
a steady flash, confirming that the security system is fully armed. However, if a point
of entry is reopened before the single chirp at 30 seconds, the passive arming process
stops, and will reset to start over again when that point of entry is reclosed.
"Automatic Last Door Arming" offers a high level of security, since it does not
require you to remember to activate the security system when you leave your vehicle.
Additionally, Automatic Last Door Arming may entitle you to an insurance discount.
Note: Arming By-Pass (page 7) does not operate with the Automatic Last Door
Arming feature. This bypass feature is designed to work only when arming from the
