Page - 30
Feature #14: 3 Or 45 Second Fully Armed Delay: (Factory Setting ON)
Feature Turned On: The security system will be become fully armed 3 seconds after
the arming siren chirp confirmation.
Feature Turned Off: The security system will be become fully armed 45 seconds
after the arming siren chirp confirmation.
Note: During the arming delay if any protected circuit should go into a triggered state,
the system will arm, but that circuit will be unprotected until it reverts back to an non-
triggered state.
Feature #15: Confirmation Chirp On Or Off: (Factory Setting ON)
Feature Turned On: The security system will chirp the siren for confirmation that
the system armed and disarmed.
Feature Turned "Off": The security system will not have siren chirps for the arming
and disarming confirmation. Note: Turning this feature off will also eliminate the
three chirps upon arming if the negative instant trigger circuit is grounded, and the four
chirps upon disarming if the system was triggered and reset. However, the Prewarn
Feature and the Programmable Features chirps will still operate.
Feature #16: 8 Hour Audible ATV On Or Off: (Factory Setting ON)
Feature Turned On:
The security system will chirp the siren for 3 seconds after the
ignition switch is turned "on" to alert you that the system has had transmitter
programming activity. After eight hours this chirping will automatically cease.
