sensor still in a triggered state at the end of the 60 seconds, the system will retrigger
for two more 60 second cycles. Should this occur the system will stop after a total of
3 minutes, while ignoring only the open entry or triggered circuit. Should the entry be
closed, protection will begin instantly for that circuit.
After the security system has been triggered, after it resets the disarm confirmation
will no longer be 2 chirps and the exterior and interior lights coming on immediately
and staying on for 30 seconds. Instead, the system will respond by producing 4 siren
chirps and flashing the lights 4 times before the lights stay on for 30 seconds. Also,
the LED Status Indicator will indicate which zone activated the system. This is
accomplished by the status indicator flashing one to four times between pauses, as
defined on page 15, until the ignition key is turned "on".
Disarming
Disarming
Disarming
Disarming
Disarming T
T
T
T
T he System Using
he System Using
he System Using
he System Using
he System Using T
T
T
T
T he
he
he
he
he T
T
T
T
T r
r
r
r
ransmitter
ansmitter
ansmitter
ansmitter
ansmitter
Disarming The System From The Transmitter: While the security system is in
the armed state, pressing and releasing the large transmitter button once will instantly
disarm the system and unlock the doors. If you have the optional unlock driver's door
feature, then upon disarming only the driver's door will unlock, and if the large trans-
mitter button is pressed again within 5 seconds or while a door is open, all of the doors
will unlock.
Disarming is confirmed by two siren chirps and the exterior and interior lights
Page - 10
