THE OMEGA ECHO 2-WAY TRANSCEIVER
“Arm/Lock”
Button
“Disarm/Unlock”
Button
“III”
Button
“II”
Button
Programming
Button
On the rear side is battery compartment. The Echo uses a standard
“AAA” 1.5 volt battery, and it will indicate when to replace the battery.
LCD
Screen
INSTALLING THE ECHO TRANSCEIVER SYSTEM
The Omega Echo transmits to and receives its signal from a remotely-mounted base re-
ceiver/transmitter unit which is plugged directly into the host security system module; no
other wiring connections are needed. The base receiver/transmitter unit may be mounted
directly to an interior glass by utilizing the attached adhesive pad (clean and prepare the
glass before adhering) for the best operating range. If a hidden location is desired, the base
transmitter/receiver unit should be placed as high as possible in the vehicle, avoiding metal
parts and wiring harnesses.
Original
Security
System
Receiver
Echo Base
Transmitter/
Receiver Unit
Step 1 Remove the
security system’s original
receiver unit and its wiring
harness.
Step 2 Replace the original receiver with
the Echo transmitter/receiver unit and
wiring harness. Using the adhesive tape,
mount the Echo transmitter/receiver onto
an interior glass
(carefully clean the surface).
Host Omega Security
System Control
Module
Plug into the Receiver /
Transceiver
Port
ECHO
) ) )
( ( ( Omega
Step 3 Program the Echo transceiver and the
original 1-way transmitters into the security system.
