• The “transmitting tower” icon is an in-range indicator. It is present if the last transmission from the
transceiver was answered by a return signal from the system. Should the transceiver be operated,
and no return signal is received, this icon will disappear.
• The various lines at the upper rear of the vehicle graphic represent a unique Omega feature which
allows the user to customize the vehicle type represented by the display. Options are: passenger car,
pickup truck, and sport utility/van.
PROGRAMMING THE ECHO TRANSCEIVER FUNCTIONS
The Omega Echo transceiver has several user-programmable features, which are:
✓
Chirp or Mute The chirps may be turned off, and replaced with vibration.
✓
Vehicle Type Choices are a passenger car, pickup truck, or van/SUV.
✓
Time Adjust To set the Echo’s clock time.
✓
Start Melody; and Stop Melody These are played with remote starting.
Configuring these features as desired is a simple process, using the Echo unit’s three round side
buttons. This is a sequential procedure, in order as follows:
1- Hold this button for 5 seconds to enter the programming mode.
2- During this time Chirp or Mute can be chosen by pressing the
button for 1 second.
OR
..
Press and hold
the button
P
After 5 seconds the Echo chirps twice; release the button
P
The upper rear of the vehicle will flash; Vehicle Type may be chosen now.
Each press of the button changes the vehicle from Passenger Car, then
to Pickup Truck, and then to Van/SUV. When the desired type is flashing
Press and release the button
..
press and release the button
P
The Time’s “Hours” will flash, and may be set now.
The Time’s “Minutes” will flash, and may be set now.
When the minutes are correct
When the Hours are correct (please note “AM” or “PM”)
press and release the button
P
Press and release the button
to advance the minutes or
..
press and release the button
to reverse the minutes.
...
Press and release the button
to advance the hours or
..
press and release the button
to reverse the hours.
...
press and release the button
P
