Units/Safety/Memory
17
26
Section 17.1 - Selection of units
After choosing the input signal type you can choose which process units should be displayed in text line 2 (see
table). By selection of temperature input the process value is always displayed in Celsius or Fahrenheit. This is
selected in the menu point after selection of temperature input.
Section 17.2 - Safety readback
When the device is delivered with default configuration, the SIL function is disabled. The safety readback
function (loop surveillance) can be selected in the menu O.RANGE, thus enabling the device to run in SIL
mode. In order to enable the SIL functionality, the menu item S4...20 mA must be selected. Please note,
however, that when safety readback is enabled, a sensor error will be indicated as an error on the analogue
output signal.
Section 17.3 - CJC
In the CJC menu you can choose between CJC connector and internal cold junction compensation. The CJC
connecter (PR 5910) must be ordered separately.
Section 17.4 - Memory
In the memory menu you can save the configuration of the device in the DRSL-DISPLAY, and then move
the DRSL-DISPLAY onto another device of the same type and download the configuration in the new
device.
