Latch
15
24
Section 15.1 - Manual deactivation of the latch function
If the relay outputs are activated and thereby latched, it will be indicated in the display. The backlight flashes and
the scrolling help text tells you how to deactivate the output. Manual deactivation is carried out by way of the
front buttons on the DRSL-DISPLAY. Use and to navigate in the menu and to validate your selection.
If the password protection has been activated, the password must be entered in order to access the deactivation
menu. See the menu structure on page 29.
Section 15.2 - Advanced functions
The device gives access to a number of advanced functions which can be reached by answering “Yes” to the point
“adv.set”.
Section 15.3 - Display setup:
Here you can adjust the brightness contrast and the backlight. Setup of TAG numbers with 6 alphanumerics.
Selection of functional readout in line 3 of the display - choose between readout of analogue output or tag no.
Section 15.4 - Two-point process calibration:
The device can be process-calibrated in 2 points to fit a given input signal . A low input signal (not necessarily
0%) is applied and the actual value is entered via DRSL-DISPLAY. Then a high signal (not necessarily 100%) is
applied and the actual value is entered via DRSL-DISPLAY. If you accept to use the calibration, the device will
work according to this new adjustment. If you later reject this menu point or choose another type of input signal
the device will return to factory calibration.
Section 15.5 - Process simulation function:
If you agree to the point “EN.SIM” it is possible to simulate an input signal by means of the arrow keys and thus
control the output signal up or down. When you finalise the point with , the device returns to normal mode.
The following point allows you to activate relay 1 and relay 2 by means of the arrow-keys up/down. You must
exit the menu by pressing (no time-out).
Section 15.6 - Password:
Here you can choose a password between 0000 and 9999 in order to protect the device against unauthorised
modifications to the configuration. The device is delivered default without password. If you have locked the
device with a password by mistake, you can always open the menu by using the master password 2008.
Section 15.7 - Language:
In the menu ”lang.setup” you can choose between 7 different language versions of help texts that will appear in the
menu. You can choose between UK, DE, FR, IT, ES, SE and DK.
OK
OK
OK
