manualshive.com logo in svg

Omega DP400TP, User Manual, Page: 33 / 60

Share
Download
Omega DP400TP User Manual Download Page 33

User manual - DP400S -

  33  

12.4  Configuration via DP-USB-CARD

The instrument can be configured quickly via a DP-USB-CARD. The DP-USB-CARD 
is connected to the micro-USB connector at the bottom of the instrument.

12.5  Creation of the DP-USB-CARD

To save a configuration of parameters on the DP-USB-CARD, with the 
instrument on, connect it to the micro-USB connector, enter configuration, set 
the parameters necessary and exit configuration. At this point, the instrument 
acknowledges the presence of the DP-USB-CARD and saves the configuration 
just made on the DP-USB-CARD as well.

Memory writing...

Saving is signaled by a message on the 
display.

12.6  Loading configuration from DP-USB-CARD

To load a configuration previously made and saved on a DP-USB-CARD, connect 
it to the micro-USB connector and power the instrument. At this point, if the 
DP-USB-CARD is detected and the data it contains is considered valid, the 
display will view the request for loading data from the DP-USB-CARD.

Load data

Esc

The user can either “Load data” load the 
parameters from the DP-USB-CARD or “Esc” 
cancel the operation without modifying the 
current configuration.

Summary of Contents for DP400TP





























































Reviews:

No comments