Omega DP400TP, User Manual, Page: 18 / 60

18 - DP400S - User manual
Press Display Do
2
“
n
”
and “
m
”
Full-scale% value : enter the
% of full-scale value at which
the calibration of upper limit
will be performed.
Value mV/V : enter the
correct value mV/V of the
sensor.
3 “Ok”
Full-scale% value : confi rm
the selected %.
Value mV/V : Confi rm the
selected mV/V value.
Visualization will automatically
switch to sensor calibration page
where real-time value read by
the device is visualized.
4
“◊%” and
“◊mV”
Press to go back to settings
of calibration % or to
settings of mV/V value of the
sensor.
Visualization will automatically
switch to the page for the setting
of full-scale % or mv/V value.
5 “
m
” Set the value on minimum.
Place the sensor on its maximum
operating position (related to
Upper limit ).
6 “
n
” Set the value to maximum
To exit standard procedure
press “Esc”. For zero setting place
the sensor on the zero point
(tare).
7 “>0<” Set the virtual zero value Press “Esc” to exit procedure.
Max
Min Zero