“
II
” or “
:
”
•
Pressing the “
II
” button for two seconds can be used to activate an extra output,
known as the “2nd channel”, for an optional function such as trunk release.
•
Pressing and releasing this button twice arms or disarms the system without the
confirmation chirps.
•
Pressing this button immediately after arming will leave the alarm armed, but
with the shock sensor feature bypassed.
“
P
” on the controller only.
•
The controller has a fifth button, “
P
”, which will illuminate the LCD screen
when pressed. This is also the “
P
rogramming” button; it is used to customize
controller operations, which is explained on pages 19 and 20.
“
III
” or “
”
•
Pressing and holding the “
III
” button for 3 seconds will activate the Panic
feature, but without locking or unlocking the doors.
•
The “
III
” button can be reprogrammed so that it can operate an additional 3rd
channel output, instead of operating Panic.
...
Page - 6
How the 2-Way Echo controller reacts is included in the following
general system operation descriptions, and then a more detailed
description the Echo’s icons and instructions for its programming
are detailed on pages 17-20.
- IMPORTANT -
The Crime Guard 750i
5
is the most versatile vehicle security system
made. It has many programmable features and includes built-in
programmable relays, which can offer more features and opera-
tions which are described in the basic system instructions.
To a large degree, these extra features and operations are config-
ured at the installation of the system. Please read the sections of
this manual which explain programmable features, and please
consult your installer for specifics on how your system is config-
ured, and for installation options which may have used, or can be
added to system after installation.
EXAMPLE- the 750i
5
can sound the vehicle’s horn in place of or in
addition to the electronic siren which is included with it. But the
operations are described with the siren only.
feature, there is a brief period of time in which a system activation, or alarm, cannot
occur. This Arming Delay allows the system to completely process its sensory
parameters, which can include the vehicle to stabilize. In some cases more time is
needed than the factory-set 3 seconds, and this feature offers three longer delay
options.
Feature #15 Steady Siren or Pulsed Horn
Factory Default Setting
Steady Siren
(
press
“arm/lock” button to program
)
Options:
Pulsed Horn Low
(
press
“disarm/unlock” button to program
)
Pulsed Horn Medium
(
press “
II
” button to program
)
Pulsed Horn High
(
press
“
III
” button to program
)
It is important to understand that the Crime Guard has a primary audible output,
for the electronic siren; and that it also has a programmable relay which among its
applications is being used to sound the vehicle’s existing horn. This feature changes
only the primary audible output, so that it can be utilized to sound the existing
horn by itself. This is for cases when the programmable relay is desired for other
features, such as unlocking the doors, or as an additional ignition or accessory
output should it be needed for the remote starting operation.
The Steady Siren setting is exactly that- a steady output which the electronic
siren requires. When programming this feature for using the output for the vehicle’s
horn, the optional setting produce pulsed output on the system’s siren wire, in
three different pulse timings, which allow a degree of customization of the horn’s
sound during the alarm activation.
Feature #16 Alarm Functions Bypass
Factory Default Setting
Off (
press
“disarm/unlock” button to program
)
Option:
On (
press
“arm/lock” button to program
)
This feature converts the system into a strictly Remote Keyless Entry System by
eliminating all antitheft alarm-oriented operations and features. When this feature
is programmed on, the Crime Guard has remote keyless entry operation only.
Page - 31
Feature #17 Ignition Activated Anti-Carjacking Protection
Factory Default Setting
Off (
press
“disarm/unlock” button to program
)
Option:
On (
press
“arm/lock” button to program
)
This form of Anti-Carjacking is initiated by the ignition key being turned on. The
Anti-Carjacking protection, and the three ways to initiate it are described on page
21.