Replacing the Bulb
To replace the bulb (use only a 60 Watt bulb), first unplug the clock from the wall.
Remove the globe from the clock by pulling upward. Remove the globe by
holding the base with one hand, and pulling up on the globe. Take care not to
break the bulb by hitting it with the globe as you do this.
Caution
was recently in use, it will be hot -- let the lamp cool before removing the bulb.
Screw in the new bulb completely. Carefully put the globe back on by lowering it
over the bulb (the slots on the globe face backwards) and make sure it is fully
home and securely held. Plug in the clock, re-set the time, alarm time, and any
other settings. Replacement bulbs are available from BioBrite or local
hardware stores (ask for a 110 Volt 60 Watt E12 Candelabra base frosted bulb).
Warranty
The EZ Wake SunRise Clock is guaranteed against any defect in its manufacture
for 12 months from the date of purchase.
Service
If your EZ Wake SunRise Clock requires service, please remove the globe and
bulb and package the base with a note containing: your name, the address to
which it should be returned after servicing, a daytime telephone number, a
description of the problem(s) you are experiencing and send it to: BioBrite
Service Department, c/o Saville Electronics, 2613 Joppa Terrace, Baltimore, MD
21234. If your clock is more than 12 months old, include a $25.00 check made
payable to “BioBrite, Inc.”. If newer, the repair is covered by the warranty.
WARRANTY FORM
NAME _______________________________________________________
ADDRESS ____________________________________________________
____________________________________________________
TELEPHONE__________________________________________________
DATE & PLACE OF PURCHASE __________________________________
MODEL/SERIAL NO. ___________________________________________
-3-
To replace the bulb (use only a 60 Watt bulb), first unplug the clock from the wall.
Remove the globe from the clock by pulling upward. Remove the globe by
holding the base with one hand, and pulling up on the globe. Take care not to
Caution
: If the bulb
let the lamp cool before removing the bulb.
Screw in the new bulb completely. Carefully put the globe back on by lowering it
the globe face backwards) and make sure it is fully
set the time, alarm time, and any
other settings. Replacement bulbs are available from BioBrite or local
andelabra base frosted bulb).
The EZ Wake SunRise Clock is guaranteed against any defect in its manufacture
If your EZ Wake SunRise Clock requires service, please remove the globe and
ckage the base with a note containing: your name, the address to
which it should be returned after servicing, a daytime telephone number, a
description of the problem(s) you are experiencing and send it to: BioBrite
onics, 2613 Joppa Terrace, Baltimore, MD
21234. If your clock is more than 12 months old, include a $25.00 check made
payable to “BioBrite, Inc.”. If newer, the repair is covered by the warranty.
_______________________________________________________
____________________________________________________
____________________________________________________________
________________
__________________________________
___________________________________________
INSTRUCTIONS
FOR THE
EZ WAKE
S
UN
R
ISE
C
LOCK
INSTRUCTIONS
FOR THE
EZ WAKE
LOCK
BioBrite, Inc
.
4330 East-West Hwy.Suite 310
Bethesda, MD 20814
301-961-5940
Email: [email protected]
Website:
www.biobrite.com
