7
Set
high
alarm
hysteresis
budongzuodai budongzuodai
CAUTION ! :
The specified performance of the CDTX-111 is entirely dependent on correct
installation. For this reason, the installer should thoroughly read the
instructions before attempting to make any electrical connections to the unit.
4. SETTING AND OPERATION
After installation, check the connection is correct, then put the sensor into
the test solution, preheat for 10 minutes, you can perform the following
operations.
4.1 Switch Measuring and Setting Mode
Instrument has two states: measuring state and setting state. After
powering up the device enters the measuring state automatically. In the
measuring state, press MENU to enter the setting state. In the setting state,
press MENU to return to the measuring state.
4.2 Menu Structure
Set high alarm value
Set low alarm value
Set
low
alarm
hysteresis
