20
6.5 Maintenance
(1) Attaching sensors are precision devices, can not disassemble in order
to avoid changing the cell constant, causing measurement errors.
(2) Sensors can not be immersed in the strong acid or alkali to avoid
surface damage of the sensors, affecting the cell constant and
sensitivity.
Correct method: When the sensor is dirty, immerse in the 10%
hydrochloric acid for a short time, then rinse with pure water that
maintain the sensor surface clean.
(3) Sensors cable is a dedicated cable, can not be replaced or extended by
users self.
(4) Instrument should be installed in a relatively dry environment or the
control box, to avoid instrument failure or measurement error caused
by damp.
7 STANDARD CONFIGURATION
CDTX-111 monitor
Mounting fixing of monitor
Operation guide
Inspection report
8 OPTIONAL CONFIGURATION
Conductivity sensor CDE-100-01/CDE-100-1 (cable length 5 meters)
Resistivity sensor CDE-100-001 (cable length 5 meters)
Extension cable
