4
2.
Safety instructions
2.1.
Product safety
Product should only be used in a technically perfect condition and in the intended, safety
and danger-aware method, taking into account the operating instructions.
2.1.1.
Safety instructions regarding transport and storage
The product must be transported and stored in its protective packaging until it is
installed.
The product must be stored in dirt-free, moist-free and frost-free space.
2.1.2.
Safety instructions regarding operation
The pipeline system must be properly designed and installed so that the drain can be
mounted and operated without tension.
Drain must be properly installed in the correct mounting position.
Operate with the product only with protective equipment.
In the event of malfunction, stop and secure the product immediately. Any fault must
be rectified immediately.
Do not exceed max. operating pressure or operating temperature range (see
Technical data).
2.1.3.
Safety instructions regarding installation, maintenance and service
Installation and maintenance work may only be carried out by trained and
experienced staff.
Depressurize the system before carrying out any work on the piping.
Installation and maintenance work may only be carried out when the product is not
under pressure.
Do not exceed max. operating pressure or operating temperature range (see data
label).
Use original spare parts only.
Use the product for the appropriate purpose only.
Can be used in hazardous areas (a product does not have its own potential ignition
source)
In case of toxic or hazardous media, the system must be completely drained before
the product is removed.
In case the product is used with toxic or hazardous media, it must be properly
decontaminated for maintenance.
Personnel must be equipped with appropriate electrostatic conductive (dissipative)
clothing including footwear and non-sparking tools.
Only qualified personnel who pose knowledge and experience with pressurized gas
systems and ATEX applications can operate the device or perform any kind of work
related to the device.
Product must be grounded via dedicated connection.
