Save these instructions.
For your safety, read, understand, and follow the information provided
with and on this wheel dolly. The owner and operator of this equipment shall have an understanding
of this wheel dolly and safe operating procedures before attempting to use. The owner and operator
shall be aware that use and repair of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in the operator's native language before use of
this wheel dolly is authorized. If any doubt exists as to the safe and proper use of this wheel dolly,
remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked or
damaged parts are noted. Any wheel dolly that appears damaged in any way, or operates abnor-
mally shall be removed from service immediately. If the wheel dolly has been or suspected to have
been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until wheel dolly has been checked by an Omega authorized service center. It is
recommended that an annual inspection be done by qualified personnel. Labels and Operator's
Manuals are available from manufacturer (see Replacement Parts on page 5).
PRODUCT DESCRIPTION
The Omega Wheel Dolly is designed to facilitate the removal and installation of pneumatic tires and
wheel assemblies on trucks , buses and trailers. It is a labor saving device useful in auto shops, bus
barns and fleet service.
SPECIFICATIONS
Model
Capacity
47050
¾ Ton
(1500 Lbs)
Product Size (L X W X H )
45 1/8” X 39 1/2” X 34 5/8”
Lifting Member
Distance
26 “
Net Weight
192 Lbs
47050-M0
2
Read and understand all warnings and
instructional material provided on and with this
product. Do not exceed rated capacity.
Thoroughly familiarize yourself with this product
before use. Use only on smooth hard, level
surfaces capable of sustaining the load. Before
moving, lower the load to the lowest possible
point and assure that the load is centered and
secured with the chain. Apply load as close to
the vertical position of the lifting member as
possible. No alterations shall be made to this
product. Failure to heed this warning may result
in severe, injury as well as property damage.
!
WARNING
Figure 1- Model 47050 Nomenclature
Chain
Front Wheel
Main Frame
Hydraulic
Unit
Lifting Member
Hook
Angle Frame
