Omega Lift Equipment 23152, Original Instruction

Page: 3 / 20

GB
Make sure that the saddle is fully lowered and that the pump piston is fully depressed.
Remove the oil filler screw on the right side and refill the oil until 5 mm to filler hole, reinstall the oil filler screw.
1. Make sure that the saddle is fully lowered and that the pump piston is fully depressed.
2. Close the oil control valve.
3. Remove the oil filler screw on the right side , and drain the fluid into a suitable container.
4. Refill the oil until 5 mm to filler hole, reinstall the oil filler screw.
5. Open the oil control valve.
A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that wheels and pump assemblies
move freely.
When used on a daily basis, the air pump should be internally lubricated before each use. Use only good quality air tool lubricant. If no inline
oiler is used, pour a teaspoon of air tool oil into the inlet of the air control valve. Simply operate the jack using the air feature in order to fully
distribute the oil.
1.
2.
1.
2.
3.
4.
5.
1.
2.
MAINTENANCE
IMPORTANT : Use only a good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission
fluid, motor oil or glycerin. Improper fluid can cause premature damage of the jack and the potential for sudden and immediate loss of load. We
recommend Mobil DTE 13 or equivalent.
Adding Oil
Changing Oil
For best performance and longest life, replace the complete fluid supply at least once a year.
NOTE : Dispose of hydraulic fluid in accordance with local regulations.
Lubrication
Cleaning
Periodically check the ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.
NOTE : Never use sandpaper or abrasive material on these surfaces !
Storage
When not in use, store the jack with the pump piston and ram fully retracted.
3