3
20160
80
3
MATERIALS
Housing material
PA6 (Polyamide) 30% glass fibres, Brass, Steel
Sealing
NBR
Safety instructions
Depressurize the system before carrying out any work on the piping.
Installation and maintenance work may only be carried out when the device is not under
pressure.
Installation and maintenance work may only be carried out by trained and experienced staff.
Do not exceed max. operating pressure or operating temperature range (see data label).
Do not use the device in hazardous areas with potentially explosive atmospheres.
Use original spare parts only.
Use the device for the appropriate purpose only.
Appropriate use
AOK16B series condensate drain is intended exclusively for the following purpose:
Draining condensate from compressed air system (cyclone condensate separator, air
filters).
Any other form of use or one going beyond this shall be considered as inappropriate. We shall have
no liability whatsoever for any damage incurred as a result.
Installation
AOK16B is easy to install inside of the filter housing.
Install the AOK16B at a level below the receiver, if not the receiver will fill up with condensate.
After initial run, open AOK16B and clean all components.
It is strongly recommended that waste condensate from discharge port is connected to water
treatment application, such as WOSm series water oil separator to protect the environment from
pollution and to comply with environmental laws.