background image

5

Safety and Warranty

INSTALLATION AND HANDLING

During unpacking in particular, you are advised to have 2 people to handle the machine. For ease of use, it is 

recommended the machine is placed on a table or work surface so as to have the juice spout in front of you 

(recommended height: 90 cm, to be adapted as required to the user).

Warning: watch out for a possible slippery floor adjacent to the appliance.

During cleaning and installation, handle the sieve (13), carefully so as not to put it out of shape thus preventing 

the machine from working properly.

IMPROPER USE

1. 

Do not place food in the feed channel and press with the plunger before you have started the machine.

2.  The appliance is not designed for handling frozen foods.

3.  Remove stones from fruit before processing it in the machine (e.g. mangoes, apricots, peaches). Do not let 

the stones go into the machine.

4.  Do not place anything other than food in the feed channel.

5.  Do not place hard food in the feed channel.

6.  The machine must not be left to operate without supervision.

7.  Neither a hose nor a pressure hose should be used for cleaning.

8.  Do not use abrasive sponges for cleaning the basket.

9.  The appliance must not be used on any surface which has a slope of more than 10° relative to the 

horizontal. The machine’s 4 feet must always be resting on this surface. The machine’s motor spindle must 

always be vertical relative to this surface.

10. Never plunge the base in water or any other liquid for reasons of protection against risks of electrocution.

11. The appliance must be unplugged before any intervention on it: cleaning, servicing, maintenance.

12. The use of spare parts other than certified original Omcan parts is prohibited.

13. 

Do not use the appliance if the power supply cord is damaged. It must be replaced by either a Omcan 

approved dealer, Omcan or a person with similar qualifications to avoid any danger.

14. 

Never connect several appliances to the same power socket.

15. 

Never use the appliance outdoors.

16. 

Never place the appliance close to or on a source of heat.

17. 

This appliance is a professional machine designed exclusively for professional use. It is not designed for 

household use.

18. This appliance is not designed for use by people (including children) whose physical, sensorial or mental 

capacities are impaired or by people with no experience or knowledge, unless they have been supervised 

or given training in the use of the appliance beforehand by a person responsible for their safety.

Supervise children to ensure they do not play with the appliance.

CAREFUL:

• 

Before connecting the machine, check that the mains electrical voltage is the same as the voltage for your 

appliance. Its value is shown:

 

- either on the identification plate under or behind the machine.

 

Summary of Contents for Santos 65





















Reviews: