7
Safety and Warranty
•
Install the unit in an indoor, well-ventilated area.
- Unit performs more efficiently in a well-ventilated area.
- For best performance, please maintain clearance of 4” on the back and side of the unit. Brackets should
be attached on the back of the unit.
- Outdoor use may cause decreased efficiency and damage to the unit.
•
Avoid installation in a high humidity and/or dusty area.
- Humidity could cause unit to rust and decrease efficiency of the unit.
- Dust collected on condenser coil will cause unit to malfunction.
- Malfunction due to dirty condenser will void warranty.
• Select a location away from heat and moisture-generating equipment.
- High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and
gradual breakdown of the unit. With the lid open, the unit should not be used in areas over 80 degrees. The
unit should not be used in areas over 90 degrees.
- Malfunction due to high ambient temperature will void warranty.
ELECTRICAL
• Please ensure that the required voltage of the compressor is being supplied at all times. Low or high
voltage can detrimentally affect the refrigeration unit.
•
All units should be plugged into a grounded and properly-sized electrical outlet with appropriate overcurrent
protection. Please refer to the electrical requirements on the nameplate.
•
Please make sure that your unit has its own dedicated outlet.
•
Do not use an extension cord.
1 YEAR PART AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste
and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
