11
Installation
Operation
following are recommended:
•
The unit is not to be placed near any kind of heat source.
• The unit is not to be placed near or inside air streams produced by ventilation fans, open doors and/ or
windows.
•
The unit is not to be situated under a roof-mounted ventilation system.
• The unit should have sufficient space to ‘breathe’ (always use the rear space to ensure minimum
clearance).
•
The unit should not be placed under direct sunlight.
•
Keep all ventilation openings in the appliance enclosure or in the structure clear of obstruction.
• In order to reduce fire hazard, the installation of this appliance must be carried out only by a suitably
qualified person.
LEVELLING THE UNIT
Place the unit at the chosen location. Using a spirit level, check whether the unit is levelled in both directions.
The spirit level can be placed on one of the shelves. It is essential that the unit is levelled during operation so
as to avoid possible ice formation on the evaporator’s fins due to insufficient drainage of the condensates. Tilt
unit by 2° angle for easy closing of door and drain.
•
Do not insert cream or spray bottles inside the cooler.
• Do not store explosive substances such as aerosol cans with flammable propellant in the cooler.
OPERATION OF THE TEMPERATURE CONTROL KNOB
1. The temperature inside the cabinet can be controlled with the temperature control knob.
2. The knob should be kept upright normally to adjust the temperature.
3. If the temperature control knob is hard to move to its original setting, coins or other tools can be inserted
into the groove to move.
Stop
Product will cease to work.
1
When the user does not need a colder temperature.
2
3
4
When in normal use.
5
When the user needs a colder temperature.
6
MAX
When the user needs a coldest temperature.
Note: the cooler should not work more than 24 hours in coldest function MAX, please turn the knob
back to 4 in time.
