5
Safety and Warranty
ATTENTION
The pasta machine is only designed for mixing, rolling and cutting of pasta and cannot be used for other
purposes. The manufacturer is not responsible in the case of:
•
Incorrect use.
•
Incorrect electrical supply.
•
Incorrect installation.
•
Alterations or repairs not authorised by the manufacturer.
• Use of spare parts other than original spare parts or which are not specifically designed for the machine.
ATTENTION
If you have any doubts, or for any use not foreseen by this manual, contact the retailer before installation is
carried out. In the case of any communication please quote the MODEL and the SERIES NUMBER of the
machine.
CAUTION
If the power lead is damaged, it must be replaced by the manufacturer or Service Dept. or in any case by
similarly qualified persons to prevent any possible hazard.
ELECTRICAL CONNECTIONS
Before operating the machine, check that the power supply to your premises corresponds to the technical
description in this booklet. It is not possible to use any other electrical supply. The manufacturer declines all
responsibility for injury to persons or damage to objects deriving from non-observance of these requirements.
Where necessary fit an adapter to the plug, checking that it is suitable for the electrical cable.
WARNING - THIS MACHINE IS NOT A TOY. WHEN IN USE THE MACHINE SHOULD BE SUPERVISED
AND OUT OF REACH OF CHILDREN.
Do not use the machine while wearing loose clothing, aprons or overalls which may be caught in the rotating
rolls of the pasta machine or in the rolling and cutting accessories. Take particular care, apart from hygienic
reasons, to ensure that hair is tied back (it is advisable to wear a protective cap) and that other items such as
necklaces and bracelets do not dangle near the moving parts.
Place the machine on a flat, stable surface, which can bear the weight of the machine. Before starting to use
the machine ensure that you know how to stop it in an emergency. Do not use the machine if:
•
It is not operating correctly.
•
It has been damaged or dropped.
•
The electrical cable or the plug are damaged.
Do not immerse the electrical cable or the plug in water.
Keep them away from hot surfaces.
Do not leave the electrical cable dangling from the edge of work surfaces or tables.
Do not use this machine near sinks or on wet surfaces.
