5
Safety and Warranty
WARNING FOR THE USER
The conditions in the surrounding area where the machine will be installed must have the following
characteristics:
•
The area must be dry.
• The area must have water and heat sources at an adequate distance.
•
Ventilation and lighting must be suitable and comply with the hygiene and safety standards foreseen by
current laws.
• The floor must be flat and compact to facilitate thorough cleaning.
• There must be no obstacles of any kind in the immediate vicinity of the machine that could effect the
machine’s normal ventilation.
In addition, the user must:
•
Make certain to keep children away from the machine when it is operating.
•
Adhere to the instructions in this manual.
•
Not remove or tamper with the safety devices on the machine.
•
Always pay careful attention to the work at hand and not use the machine when in a distracted state.
•
Perform all operations with maximum safety and calm.
•
Respect the instructions and warnings displayed on the machine labels.
The labels are accident prevention devices, and therefore must always be perfectly legible. If these should be
damaged and illegible, it is mandatory to replace them by requesting replacements from the Manufacturer.
•
At the end of each working shift, before cleaning, maintenance or transfer operations, disconnect electrical
power.
WARNINGS FOR THE MAINTENANCE OPERATOR
Observe the instructions indicated in this manual.
•
Always use individual safety devices and other protection means.
•
Before starting any maintenance operations, make sure that the oven, it was used, is cooled down.
•
If any of the safety devices is worn or faulty, the oven is also considered faulty and not to be used.
•
Disconnect electrical power before intervening on electrical or electronic parts and connectors.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
