9
Technical Specifications
Installation
Model
IC-CN-0529
Max Ambient Temp Rating
32°C / 90°F
Production
500 lbs. / 225 kgs. per day
Capacity
275 lbs. / 125 kgs.
Ice Shape
Cube
Refrigerant
R290
Power
1113 W
Condenser Unit
Air
Electrical
115V / 60Hz / 1
Over-All Dimensions
29.9” x 32.7” x 67.6” / 759 x 831 x 1717mm
Ice Maker Head Dimensions
29.9” x 24.3” x 22.4” / 759 x 617 x 569mm
Ice Bin Dimensions
29.9” x 32.7” x 45.3” / 759 x 831 x 1151mm
Weight
143.3 lbs. / 65 kgs.
Packaging Dimensions
33.3” x 29.5” x 24.4” / 845 x 749 x 620mm
Packaging Weight
154.3 lbs. / 70 kgs.
Item Number
46452
The ice machine should be installed in a proper location meeting the following conditions:
• Indoor, not more than 2,000 meters above sea level.
• Ambient temperature cannot exceed 32°C.
• Power supply: the rated voltage indicated on the machine nameplate ±6%.
• Water source: potable water, with water pressure from 1.3 Bar to 5.5 Bar; water temperature: 5-35°C.
•
The ice machine should be kept away from heat sources, and should be strictly forbidden to use at
extremely high temperature or low temperature environment, and should avoid direct sunlight.
• There should be sufficient ventilation space around the ice machine and keep good ventilation; the distance
from the ice maker to the wall should be no less than 30 cm for the front, 15cm for the sides, and 20 cm for
the rear.
• The ice machine must be placed on a floor sufficient to support its weight.
•
Socket for the ice maker must be reliably grounded and with leakage protection.
• Proper floor drainage must be provided near the installation location of the ice machine.
INSTALLATION STEPS
1. Check if the ice machine is in good condition and the accessories are complete; check the machine model
and the machine nameplate.
2.
Clean the ice bin and the food area inside with a sponge soaked in warm water and soda. Then wash and
