![background image](http://html1.mh-extra.com/html/omcan/f300tcv/f300tcv_instruction-manual_4106644018.webp)
18
•
Spread a small quantity of oil on the bar and move the assembly 3 or 4 times;
•
Clean as required to remove excess of oil.
ADJUSTMENT OF MOTOR BELT TENSION
After a given period of service an unusual noise may occur because of the belt bedding. In this case, tighten
the belt-stretcher on the side of the motor under the machine base.
•
Disconnect the plug from the mains;
•
Lift the machine and turn it on one side as shown in the picture;
•
Unscrew the feet (1), unloose the screw (2) and remove the guard (3);
• Partially unscrew the nut (4);
•
Turn the belt-stretcher (5) until the optimal tension of the belt is obtained (6);
•
Tighten the nut (4) and install the guard (3), the screw (2) and the feet (1).
Maintenance
Summary of Contents for F300TCV
Page 42: ...42...