4
Safety & Warranty
•
Avoid running the slicers with no product on it;
•
The slicers are equipped with a ventilated motor. Extended continual use is not recommended. Let the
motor cool down after 30 minutes of use.
1 YEAR BENCH WARRANTY
MANUFACTURER’S WARRANTY AND LIABILITY
The manufacturer’s warranty covering the good functioning of the machines and their compliance to the
service for which they have been designed depends on the correct application of the instructions contained in
this manual. The Manufacturer assumes no liability either direct or indirect deriving from:
•
Failure to comply with the instructions contained in this manual;
•
Use of the machine by personnel who has not read or fully understood the content of this manual;
• Use not complying to the specific norms currently applicable in the country of installation;
• Unauthorized modifications and/or repairs;
•
Use of non original accessories or spare parts;
•
Exceptional events.
ENVIRONMENTAL CONDITIONS OF USE
Temperature: from -5 °C a + 40 °C
Relative humidity: max 95%
OPENING THE BOX
On reception check packaging integrity, otherwise inform the forwarding agent or the area agent immediately.
To unpack the machine, proceed as follows:
•
Open the box and remove your copy of the manual of use and maintenance, then proceed according to the
instructions found on that manual;
•
Lift the machine still wrapped in a transparent polyethylene sheet and extract it from the box;
•
Now check the box content and make sure it corresponds to what shown on the external label.
WARNING:
The packaging components (cardboard,
polyethylene, and others) are classified as
normal solid urban waste and can therefore be
disposed of without difficulty.
In any case, for
suitable recycling, we suggest disposing
of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING
MATERIALS IN THE ENVIRONMENT!
Summary of Contents for F300TCV
Page 42: ...42...