6
Installation
Operation
The mini bandsaws have to be installed on a working surface with a recommended height of 850mm. The
surface length should be 120cm (with cutting regulator) or 70cm (without cutting regulator).
Grounding wire must always be connected.
IMPORTANT: Check the tension of the blade by turning the handle clockwise before operating it.
BEFORE OPERATION
Check if the machine is firm, no movement is allowed on the supporting surface. Wash with warm water and
soap all the food-contact parts, and wipe dry. To do it proceed as follows:
1. First of all switch the machine off and disconnect it from the power source.
2. Open the upper door and lower door by pulling the handle.
3. Loosen the blade turning the handle or calibrator (optional) clockwise and take it out from the upper and
lower wheels.
4. Take out the staples which are in front of the upper and lower wheels to be able to pull them out.
5. Assemble the components following the inverse steps.
IMPORTANT: The blade must be well calibrated. Use the handle turning it clockwise to get the right
tension of the blade. Keep the machine off to adjust the cutting regulator.
Technical Specifications
Model
BS-BR-1880
Blade Length
74” / 1880mm
Cutting Capacity
10” x 8.5” / 254 x 216mm
Power
0.5 HP / 0.37 kW
Electrical
110V / 60Hz / 1
Weight
77 lbs. / 35 kgs.
Packaging Weight
131 lbs. / 59 kgs.
Dimensions
19.7” x 25.2” x 38.6” / 500 x 640 x 980mm
Packaging Dimensions
32” x 27” x 42” / 813 x 686 x 1067mm
Item Number
10274