7
Assembly Instructions
2. Remove any plastic protective film prior to assembling. Place the complete secured lower left side door and
hinge assembly into the lower left side of the cabinet.
3. Place the left side top door hinge assembly into the upper frame left hole slot and proceed to slide and
insert the complete glass door into the top door hinge. Please note the arrow direction in the figure above.
Once in place slide supplied gaskets in between door hinge assembly and glass door making sure white
gasket is in behind door hinge with screws and tighten loosely.
4. Paying specific attention to the door gaps, adjust accordingly leaving the same even space around the
complete perimeter of the door. During this process tighten and loosen the screws till the door is plumb and
level making sure it opens and closes freely without obstruction. Review the figure above.