8
Installation
Assembly Instructions
ACCESSORIES INCLUDED:
No:
Item
Quantity
Unit
1
Tempered Glass
4
pcs
2
Turn Basket Display
1
sets
3
Water Pan
1
pcs
5. Installing the magnet door catch/release along with the separate magnet interlock catch is similar to
the door hinges; only difference is they do not swivel. They must however mate up and align facing the
magnetic door latch, and separate magnet door interlock switch. It is located on the top inside right side of
the display warmer case. Please note the white gaskets should always be facing the screw side of the door
catches. Again align door latch and lock into place making sure it aligns to the push type locking hardware.
Next place the interlock latch with the provided miniature magnet (black rectangular magnet)and place
it into the slot of the latch and glass door. Tighten screws, paying attention not to over tighten. The door
should now be able to be opened and close by simply pressing the top right hand latch and the magnet
should release allowing the door to open and thus stop the rotating display. Closing is just the reverse and
thus will magnetically lock the door and start the rotation of the display.
6. The above is a final photo of what your DH18 Pizza Display Warmer will look like. If necessary you can still
adjust the door gaps as required by loosening the screws and re-adjusting the glass accordingly.