Omcan CM-CN-0002-D, Instruction Manual

Page: 5 / 20

5
Safety and Warranty
• When working, the unit has to be placed in a horizontal position.
• Unit only suitable for indoor and countertop to use.
• Before installation, you should confirm the rating plate on the machine is suitable for your electric outlet.
• When the machine is in use, some parts of the machine are very hot. Ensure the power cord does not
touch the hot parts. The use should also be careful not to touch the hot parts.
• Remain in the vicinity of the machine while machine is in operation.
• Don’t disconnect appliance with wet hands and Don’t pull the supply cord.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Please stop to use unit when power cord damaged, the power cord should be replaced by qualified person
with specified type, please contact with the service agent or the Sales Rep. of distributor.
• In the following pages, all the important items are marked by to attract your attention.
Disclaimer: The Manufacturer will accept no liability for any injury or damage caused by
incorrect usage of the machine or by improper operation contrary to information given in this
Instruction Manual.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!