4
Safety and Warranty
Installation
be carried out solely by competent personnel.
It is dangerous to modify or attempt to modify the characteristics of this appliance.
Never clean the appliance with direct water jets, because, if any water enters, it could limit the machine’s
safety.
Before doing any maintenance or cleaning jobs, disconnect the appliance from the electrical mains and allow it
to cool.
When the tilting door is wide open, do not put anything on the surface, because the door hinges could be
irreparably damaged.
Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the nearest Service Centre
and use only original spare parts.
1 YEAR WARRANTY
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
INSTRUCTIONS FOR THE INSTALLER
DOBRA convection ovens are recommended to be located in an open area. If it is necessary to install the oven
in an enclosed area due to space considerations, the back of the oven, where all the mechanisms, electric and
precision equipment are located, must be 10 - 12mm / 4 - 5” from any furniture or the wall. This allows oxygen
to circulate, ensuring that the DOBRA convection oven will function correctly.
It is recommended the oven to be installed by qualified personnel with knowledge of all regulatory
requirements. Please note the specifications on the card attached to the DOBRA convection oven, indicating
the voltage, amperes, power rating and connection block.
Check that the electrical installation on the premises meets established requirements. If it does not, it would
